射頻信號源 > 矢量信號源 產品屬性:主機 簡 述: R&S SGT100A 是集成">
取消
清空記錄
歷史記錄
清空記錄
歷史記錄
R&S ? SGT100A 是一款帶有集成基帶發生器的射頻矢量信號發生器。它已針對生產和自動化應用進行了優化。
*快的矢量信號發生器,具有典型的頻率和電平切換時間。240 μs 優化生產吞吐量
*小的**矢量信號發生器,頻率高達 6 GHz,帶有集成基帶發生器(1 HU ? 19")
集成基帶發生器,I/Q 調制帶寬高達 240 MHz(在 RF 中),支持所有高級數字標準,包括 IEEE 802.11ac
**的 EVM 和 ACLR 射頻性能
使用 R&S ? WinIQSIM2 ?仿真軟件為 LTE 和 LTE-Advanced 等數字標準輕松生成信號
R&S ? SMW200A 在具有兩個以上接收天線的 MIMO 應用中的理想增強
Frequency | ||
Frequency range | CW mode and I/Q mode | 1 MHz to 3 GHz |
with the R&S?SGT-KB106 option CW mode and I/Q mode | 1 MHz to 6 GHz | |
Setting time | with PCIe/Ethernet remote control | < 500 μs |
Input frequency for external reference | into R&S?SGT100A | 10 MHz, 13 MHz, 100 MHz, 1000 MHz |
Level | ||
Specified level range | –120 dBm to +17 dBm (PEP)(peak envelope power) | |
Setting time | with PCIe/Ethernet remote control, setting characteristic: auto | < 500 μs |
Spectral purity | ||
Harmonics | level ≤ 8 dBm, CW, I/Q wideband off | < –30 dBc |
Nonharmonics | level > –10 dBm, offset > 10 kHz from carrier, f ≤ 1.5 GHz | < –76 dBc |
Wideband noise | 10 MHz carrier offset,level > 5 dBm, 1 Hz meas. bandwidth, CW | < –145 dBc |
SSB phase noise | 20 kHz carrier offset, 1 Hz measurement bandwidth | |
f = 1 GHz | < –126 dBc, typ. –133 dBc | |
f = 6 GHz | < –110 dBc, typ. –117 dBc | |
Pulse modulation | optional, with the R&S?SGT-K22 option | |
On/off ratio | > 80 dB | |
Minimum pulse width | using the integrated pulse generator | 20 ns |
I/Q modulation | ||
I/Q modulator bandwidth (RF) | using an external analog signal 100 MHz < f ≤ 2.5 GHz, I/Q wideband 2.5 GHz < f ≤ 6 GHz, I/Q wideband | 20 % of carrier frequency 1 GHz |
using the integrated baseband source with the R&S?SGT-K521 option with the R&S?SGT-K521 and R&S?SGT-K522 options, with the R&S?SGT-K521, R&S?SGT-K522 and R&S?SGT-K523 options | 60 MHz 120 MHz 160 MHz 240 MHz | |
Waveform length | in one-sample steps | 1 sample to 32 Msample |
with the R&S?SGT-K511 option | 1 sample to 256 Msample | |
with the R&S?SGT-K511 and R&S?GT-K512 options | 1 sample to 1 Gsample | |
Waveform changeover time in multisegment waveform mode | 50 MHz clock rate (external trigger, without clock change) | 5 μs (meas.) |
Sample resolution | equivalent to D/A converter | 16 bit |
ACLR | WCDMA 3GPP FDD, TM 1-64 | > 68 dB; typ. 71 dB |
EVM | IEEE 802.11ac, 160 MHz, MCS 9 | typ. 0.4 % |
Supported standards with R&S?WinIQSIM2?TM | with additional options | EUTRA/LTE, LTE-Advanced, 3GPP FDD incl. HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, CDMA2000?/1xEV-DO, TETRA, IEEE 802.11a/b/g/n/p/ac, IEEE 802.16, Bluetooth?, NFC, DVB-H/DVB-T, DAB/T-DMB, GPS, Galileo, GLONASS, BeiDou |
Remote control | PCIe (single lane), Ethernet (TCP/IP) 10/100/1000BASET, USB 2.0 | |
General data | ||
Power consumption | 65 W (meas.) | |
Dimensions | W × H × D, per unit | 250 mm × 52.5 mm × 401 mm (9.84 in × 2.07 in × 15.79 in) 1 HU, ? 19“ rack width |
Weight | when fully equipped, per unit | 4.0 kg (8.82 lb) |
Recommended calibration interval | 40 h/week operation in the full range of the specified environmental conditions | 3 years |
R&S ? SGT100A 是一款帶有集成基帶發生器的射頻矢量信號發生器。它已針對生產和自動化應用進行了優化。
*快的矢量信號發生器,具有典型的頻率和電平切換時間。240 μs 優化生產吞吐量
*小的**矢量信號發生器,頻率高達 6 GHz,帶有集成基帶發生器(1 HU ? 19")
集成基帶發生器,I/Q 調制帶寬高達 240 MHz(在 RF 中),支持所有高級數字標準,包括 IEEE 802.11ac
**的 EVM 和 ACLR 射頻性能
使用 R&S ? WinIQSIM2 ?仿真軟件為 LTE 和 LTE-Advanced 等數字標準輕松生成信號
R&S ? SMW200A 在具有兩個以上接收天線的 MIMO 應用中的理想增強
Frequency | ||
Frequency range | CW mode and I/Q mode | 1 MHz to 3 GHz |
with the R&S?SGT-KB106 option CW mode and I/Q mode | 1 MHz to 6 GHz | |
Setting time | with PCIe/Ethernet remote control | < 500 μs |
Input frequency for external reference | into R&S?SGT100A | 10 MHz, 13 MHz, 100 MHz, 1000 MHz |
Level | ||
Specified level range | –120 dBm to +17 dBm (PEP)(peak envelope power) | |
Setting time | with PCIe/Ethernet remote control, setting characteristic: auto | < 500 μs |
Spectral purity | ||
Harmonics | level ≤ 8 dBm, CW, I/Q wideband off | < –30 dBc |
Nonharmonics | level > –10 dBm, offset > 10 kHz from carrier, f ≤ 1.5 GHz | < –76 dBc |
Wideband noise | 10 MHz carrier offset,level > 5 dBm, 1 Hz meas. bandwidth, CW | < –145 dBc |
SSB phase noise | 20 kHz carrier offset, 1 Hz measurement bandwidth | |
f = 1 GHz | < –126 dBc, typ. –133 dBc | |
f = 6 GHz | < –110 dBc, typ. –117 dBc | |
Pulse modulation | optional, with the R&S?SGT-K22 option | |
On/off ratio | > 80 dB | |
Minimum pulse width | using the integrated pulse generator | 20 ns |
I/Q modulation | ||
I/Q modulator bandwidth (RF) | using an external analog signal 100 MHz < f ≤ 2.5 GHz, I/Q wideband 2.5 GHz < f ≤ 6 GHz, I/Q wideband | 20 % of carrier frequency 1 GHz |
using the integrated baseband source with the R&S?SGT-K521 option with the R&S?SGT-K521 and R&S?SGT-K522 options, with the R&S?SGT-K521, R&S?SGT-K522 and R&S?SGT-K523 options | 60 MHz 120 MHz 160 MHz 240 MHz | |
Waveform length | in one-sample steps | 1 sample to 32 Msample |
with the R&S?SGT-K511 option | 1 sample to 256 Msample | |
with the R&S?SGT-K511 and R&S?GT-K512 options | 1 sample to 1 Gsample | |
Waveform changeover time in multisegment waveform mode | 50 MHz clock rate (external trigger, without clock change) | 5 μs (meas.) |
Sample resolution | equivalent to D/A converter | 16 bit |
ACLR | WCDMA 3GPP FDD, TM 1-64 | > 68 dB; typ. 71 dB |
EVM | IEEE 802.11ac, 160 MHz, MCS 9 | typ. 0.4 % |
Supported standards with R&S?WinIQSIM2?TM | with additional options | EUTRA/LTE, LTE-Advanced, 3GPP FDD incl. HSPA/HSPA+, GSM/EDGE/EDGE Evolution, TD-SCDMA, CDMA2000?/1xEV-DO, TETRA, IEEE 802.11a/b/g/n/p/ac, IEEE 802.16, Bluetooth?, NFC, DVB-H/DVB-T, DAB/T-DMB, GPS, Galileo, GLONASS, BeiDou |
Remote control | PCIe (single lane), Ethernet (TCP/IP) 10/100/1000BASET, USB 2.0 | |
General data | ||
Power consumption | 65 W (meas.) | |
Dimensions | W × H × D, per unit | 250 mm × 52.5 mm × 401 mm (9.84 in × 2.07 in × 15.79 in) 1 HU, ? 19“ rack width |
Weight | when fully equipped, per unit | 4.0 kg (8.82 lb) |
Recommended calibration interval | 40 h/week operation in the full range of the specified environmental conditions | 3 years |